BS 65:1991
Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings.
AMD 8622 1995.
BS EN 274:1993
Sanitary tapware. Waste fittings for basins, bidets and baths. General technical specifications. (Withdrawn and superseded by BS EN 274-1:2002 Waste fittings for sanitary appliances. Requirements. AMD 14959 2004. BS EN 274-2:2002 Waste fitting for sanitary appliances. Test methods. AMD 14957 2004. BS EN 274-3:2002 Waste
fittings for sanitary appliances. Quality control. AMD 14958 2004.)
BS EN 295-1:1991
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test requirements. AMD 9290 1996, AMD 9429 1995, AMD 10621 1999.
BS EN 295-2:1991
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling. AMD 10620 1999.
BS EN 295-3:1991
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods. AMD 10357 1999.
BS EN 295-6:1996
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes. AMD 15279 2004.
BS 416-1:1990
Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems.
BS 437:1978
Specification for cast iron spigot and socket drain pipes and fittings. AMD 5877 1988.
BS EN 598:1995
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods.
BS EN 752-1:1996
Drain and sewer systems outside buildings.
Generalities and definitions.
BS EN 752-2:1997
Drain and sewer systems outside buildings.
Performance requirements.
BS EN 752-3:1997
Drain and sewer systems outside buildings.
Planning. AMD 10984 2000, AMD 13038 2001.
BS EN 752-4:1998
Drain and sewer systems outside buildings.
Hydraulic design and environmental considerations. AMD 15442 2005.
BS EN 752-5:1998
Drain and sewer systems outside buildings.
Rehabilitation.
BS EN 752-6:1998
Drain and sewer systems outside buildings.
Pumping installations.
BS EN 752-7:1998
Drain and sewer systems outside buildings.
Maintenance and operations. AMD 10440 1999.
BS EN 877:1999
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.
BS 882:1992
Specification for aggregates from natural sources for concrete. AMD 13579 2002. (Withdrawn and superseded by BS EN 1260:2002
Aggregates for concrete. AMD 15333 2004.)
BS EN 1057:1996
Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.
BS EN 1091:1997
Vacuum sewerage systems outside buildings.
BS EN 1254-1:1998
Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes. AMD 10099 1998.
BS EN 1254-2:1998
Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes.
BS EN 1254-3:1998
Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes.
BS EN 1254-4:1998
Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends. AMD 10750 1999.
BS EN 1254-5:1998
Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes. AMD 10100 1998.
BS EN 1295-1:1998
Structural design of buried pipelines under various conditions of loading. General requirements.
BS EN 1329-1:2000
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized polyvinyl chloride (PVC-U). Specifications for pipes, fittings and the system.
BS EN 1401-1:1998
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Specifications for pipes, fittings and the system. AMD 13794 2002.
BS EN 1451-1:2000
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP).
Specifications for pipes, fittings and the system.
AMD 13819 2002.
BS EN 1455-1:2000
Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadienestyrene (ABS).
Specifications for pipes, fittings and the system.
AMD 13818 2002.
BS EN 1519-1:2000
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system. AMD 13817 2002.
BS EN 1565-1:2000
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and the system. AMD 13816 2002.
BS EN 1566-1:2000
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly (vinyl chloride) (PVC-C). specification for pipes, fittings and the system. AMD 13815 2002.
BS EN 1610:1998
Construction and testing of drains and sewers.
BS EN 1671:1997
Pressure sewerage systems outside buildings.
BS EN 1825-1:2004
Installations for separation of grease. Principles of design, performance and testing, marking and quality control.
BS EN 1825-2:2002
Installations for separation of grease. Selection of nominal size, installation and maintenance.
BS EN 1852-1:1998
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system. AMD 14514 2003.
BS 3868:1995
Specification for prefabricated drainage stack units in galvanized steel.
BS 3921:1985
Specification for clay bricks.
(Current but partially superseded by BS EN 7723:1998 Method of test for masonry units. Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing. BS EN 772-7:1998 Method of test for masonry units. Determination of water absorption of clay masonry damp proof course units by boiling in water.)
BS 5255:1989
Specification for thermo-plastics waste pipe and fittings.
(Current but partially superseded by BS EN 13291:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system.
BS EN 1455-1:2000 Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrilebutadiene-styrene (ABS). Specifications for pipes, fittings and the system. AMD 13818 2002.
BS EN 1519-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system. AMD 13817 2002.
BS EN 1565-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and the system. AMD 13816 2002.
BS EN 1566-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Specification for pipes, fittings and the system. AMD 13815 2002.)
BS 5911-2:1982
Precast concrete pipes, fittings and ancillary products. Specification for inspection chambers. AMD 5146 1986, AMD 8077 1994, AMD 11030 2001. (Withdrawn and superseded by BS 5911-4:2002 Concrete pipes and ancillary concrete products. Specification for unreinforced and reinforced concrete inspection chambers. AMD 15038 2004.
BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced. AMD 15289 2004.)
BS 5911-100:1988
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced pipes and fittings with flexible joints.
AMD 6269 1989, AMD 7588 1993. (Withdrawn and superseded by BS 5911-1:2002 Concrete pipes and ancillary concrete products.
Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints. AMD 15040 2004. BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced. AMD 15288 2004.)
BS 5911-120:1989
Precast concrete pipes, fittings and ancillary products. Specification for reinforced jacking pipes with flexible joints. AMD 9020 1996. (Withdrawn and superseded by BS 5911-1:2002 Concrete pipes and ancillary concrete products. Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints. AMD 15040 2004.
BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced. AMD 15288 2004.)
BS 5911-200:1994
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section. AMD 11031 2001, AMD 13205 2001. (Withdrawn and superseded by BS 5911-3:2002 Concrete pipes and ancillary concrete products. Specification for unreinforced and reinforced concrete manholes and soakaways. AMD 15039 2004.
BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced. AMD 15289 2004.)
BS 6798:2000
Specification for installation of gas-fired hot water boilers of rated input not exceeding 70kW. AMD 14908 2005.
BS 7158:2001
Plastics inspection chambers for drains and sewers. Specification.
(Current but superseded by BS EN 13598-1:2003 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for ancillary fittings including shallow inspection chambers.)
BS 8000-13:1989
Workmanship on building sites. Code of practice for above ground drainage and sanitary appliances.
BS 8000-14:1989
Workmanship on building sites. Code of practice for below ground drainage.
BS 8110-1:1997
Structural use of concrete. Code of practice for design and construction. AMD 9882 1998, AMD 13468 2002, AMD 16016 2005.
BS EN 12050-1:2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter.
BS EN 12050-2:2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for faecal-free wastewater.
BS EN 12050-3:2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter for limited applications.
BS EN 12056-1:2000
Gravity drainage systems inside buildings.
General and performance requirements.
BS EN 12056-2:2000
Gravity drainage systems inside buildings.
Sanitary pipework, layout and calculation.
BS EN 12056-3:2000
Gravity drainage systems inside buildings. Roof drainage, layout and calculation.
BS EN 12056-4:2000
Gravity drainage systems inside buildings.
Wastewater lifting plants. Layout and calculation.
BS EN 12056-5:2000
Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use.
BS EN 12109:1999
Vacuum drainage systems inside buildings.
BS EN 12380:2002
Air admittance valves for drainage systems. Requirements, test methods and valuation of conformity.
BS EN 13564-1:2002
Anti-flooding devices for buildings. Quality assurance.
BS EN 13564-2:2002
Anti-flooding devices for buildings. Test methods.
BS EN 13564-3:2002
Anti-flooding devices for buildings. Quality assurance.
H2
BS 5328-1:1997
Concrete. Guide to specifying concrete. AMD 10364 1999, AMD 13876, AMD 14163 2002.
(Withdrawn and superseded by BS 8500-1:2002 Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier. AMD 14639 2003.
BS 8500-2:2002 Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete. AMD 14640 2003.
BS EN 206-1:2000 Concrete. Specification, performance, production and conformity. AMD 13189 2001, AMD 14857 2004, AMD 15359 2004, AMD 15406 2004.)
BS 5328-2:1997
Concrete. Methods for specifying concrete mixes. AMD 9691 1997, AMD 10365 1999, AMD 10612 1999, AMD 13877.
(Withdrawn and superseded by BS 8500-1:2002
Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier. AMD 14639 2003.
BS 8500-2:2002 Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete. AMD 14640 2003.
BS EN 206-1:2000 Concrete. Specification, performance, production and conformity. AMD 13189 2001, AMD 14857 2004, AMD 15359 2004, AMD 15406 2004.)
BS 5328-3:1990
Concrete. Specification for the procedures to be used in producing and transporting concrete. AMD 6927 1991, AMD 7176 1992, AMD 9312, AMD 10366 1999, AMD 10708 1999, AMD 13878 2002. (Withdrawn and superseded by BS 8500-1:2002 Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier. AMD 14639 2003. BS 8500-2:2002 Concrete.
Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete. AMD 14640 2003.
BS EN 206-1:2000 Concrete. Specification, performance, production and conformity. AMD 13189 2001, AMD 14857 2004, AMD 15359 2004, AMD 15406 2004.)
BS 5328-4:1990
Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete. AMD 6928 1991, AMD 8760 1995, AMD 9313, AMD 10367 1999, AMD 10611 1999.
(Withdrawn and superseded by BS 8500-1:2002
Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier. AMD 14639 2003.
BS 8500-2:2002
Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete. AMD 14640 2003. BS EN 206-1:2000 Concrete. Specification, performance, production and conformity. AMD 13189 2001, AMD 14857 2004, AMD 15359 2004, AMD 15406 2004.)
BS 6297:1983
Code of practice for design and installation of small sewage treatment works and cesspools. AMD 1650 1990.
BS 7781:1994
Procedure for type testing of small biological domestic wastewater treatment plants.
BS EN 12566-1:2000
Small wastewater treatment plants less than 50 PE. Part Prefabricated septic tanks. AMD 14918 2004.
H3
BS EN 752-1:1996
Drain and sewer systems outside buildings.
Generalities and definitions.
BS EN 752-2:1997
Drain and sewer systems outside buildings.
Performance requirements.
BS EN 752-3:1997
Drain and sewer systems outside buildings.
Planning. AMD 10984 2000, AMD 13038 2001.
BS EN 752-4:1998
Drain and sewer systems outside buildings. Hydraulic design and environmental considerations. AMD 15442 2005.
BS EN 752-5:1998
Drain and sewer systems outside buildings.
Rehabilitation.
BS EN 752-6:1998
Drain and sewer systems outside buildings.
Pumping installations.
BS EN 752-7:1998
Drain and sewer systems outside buildings.
Maintenance and operations. AMD 10440 1999.
BS EN 858:2001
Separator systems for light liquids (e.g. oil and petrol). Principles of product design, performance and testing, making and quality control. AMD 15525 2005.
BS EN 858-2:2003
Separator systems for light liquids (e.g. oil and petrol). Selection of nominal size, installation, operation and maintenance.
BS EN 1295-1:1998
Structural design of buried pipelines under various conditions of loading. General requirements.
BS EN 1610:1998
Construction and testing of drains and sewers.
BS EN 12056-1:2000
Gravity drainage systems inside buildings.
General and performance requirements.
BS EN 12056-2:2000
Gravity drainage systems inside buildings.
Sanitary pipework, layout and calculation.
BS EN 12056-3:2000
Gravity drainage systems inside buildings. Roof drainage, layout and calculation.
BS EN 12056-4:2000
Gravity drainage systems inside buildings.
Wastewater lifting plants. Layout and calculation.
BS EN 12056-5:2000
Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use.
H4
–
H5
–
H6
BS 5906:2005
Code of practice for waste management in buildings.
Other publications referred to
H1
Water Regulations Advisory Scheme (WRAS)
Information and Guidance Note 09-02-05 Marking and identification of pipe work for reclaimed and (grey water) systems, 1999.
Information and Guidance Note 09-02-04 Reclaimed water systems. Information about installing, modifying or maintaining reclaimed water systems, 1999.
WRAS documents available from WRAS, Fern Close, Pen-y-Fan Industrial Estate, Oakdale, Gwent, NP11 3EH, Tel 01495 248454, Fax 01495 249235, email [email protected]. Available to download from www.wras.co.uk/
Water Research Council (WRc) Sewers for adoption. A design and construction guide for developers, 5th edition, 2001. ISBN 1 89892 043 5
H2
BRE
Good Building Guide GBG 42 Part 1 Reed beds: application and specification, 2000. ISBN 1 86081 436 0
Good Building Guide GBG 42 Part 1 Reed beds: design, construction, 2000. ISBN 1 86081 437 9
Environment Agency
Pollution Prevention Guidelines PPG 4 Disposal of sewage where no mains drainage is available, 2001. Available to download from www.netregs.gov.uk
H3
BRE
Digest 365 Soakaway design, 1991 (minor revisions 2003). ISBN 1 86081 604 5
CIRIA
Publication C522 Sustainable urban drainage systems – design manual for England and Wales, 2000. ISBN 0 86017 522 7
Report 156 Infiltration drainage – Manual of good practice, 1996. ISBN 0 86017 457 3
Environment Agency
Pollution Prevention Guidelines PPG 3 Use and design of oil separators in surface water drainage systems, 2000. Available to download from www.netregs.gov.uk
H R Wallingford
Report SR 463 Performance of syphonic drainage systems for roof gutters.
Department for Communities and Local Government
Planning Policy Guidance 14, Development on unstable land – Annex 1: Landslides and planning, 1996. ISBN 0 11753 259 2. Available to download from www.gov.uk
Water Regulations Advisory Scheme (WRAS)
Information and Guidance Note 09-02-05 Marking and identification of pipe work for reclaimed and (greywater) systems, 1999.
Information and Guidance Note 09-02-04 Reclaimed water systems. Information about installing, modifying or maintaining reclaimed water systems, 1999.
H4
–
H5
–
H6
NHBC Foundation
Report NF60 Avoiding rubbish design. Providing for bin storage on new housing developments, 2015. Available to download from www.nhbcfoundation.org
