Standards referred to
A1/2
BS 5080-1:1993
Structural fixings in concrete and masonry. Method of test for tensile loading.
BS 8103-1:2011
Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing.
BS 8103-2:2005
Structural design of low-rise buildings. Code of practice for masonry walls for housing.
BS 8103-3:2009
Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing.
BS 8297:2000
Code of practice for design and installation of non-loadbearing precast concrete cladding. AMD 11064 2000, AMD 13018 2000.
BS 8298-1:2010
Code of practice for the design and installation of natural stone cladding and lining. General.
BS 8298-2:2010
Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding.
BS 8298-3:2010
Code of practice for the design and installation of natural stone cladding and lining. Stone-faced pre-cast concrete cladding systems.
BS 8298-4:2010
Code of practice for the design and installation of natural stone cladding and lining. Rainscreen and stone on metal frame cladding systems.
BS 8500-1:2006+A1:2012
Concrete. Complementary British Standard toBS EN 206-1. Method of specifying and guidance for the specifier.
BS 8500-2:2006+A1:2012
Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete.
BS EN 197-1:2011
Cement. Composition, specifications and conformity criteria for common elements.
BS EN 197-2:2000
Cement. Conformity evaluation.
BS EN 771-1:2011
Specification for masonry units. Clay masonry units.
BS EN 771-2:2011
Specification for masonry units. Calcium silicate masonry units.
BS EN 771-3:2011
Specification for masonry units. Aggregate concrete masonry units (dense and light-weight aggregates). AMD 16001.
BS EN 771-4:2011
Specification for masonry units. Autoclaved aerated concrete masonry units.
BS EN 771-5:2011
Specification for masonry units. Manufactured stone masonry units.
BS EN 771-6:2011
Specification for masonry units. Natural stone masonry units.
BS EN 845-1:2003+A1:2008
Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets. AMD 14736 2003, AMD 15539 2006.
BS EN 845-2:2003
Specification for ancillary components for masonry. Lintels.
BS EN 845-3:2003+A1:2008
Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork.
BS EN 998-2:2010
Specification for mortar for masonry. Masonry mortar. AMD July 2011.
BS EN 1090-2:2008+A1:2011
Execution of steel structures and aluminium structures – Part 2: Technical requirements for the execution of steel structures.
BS EN 1090-3:2008
Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures.
BS EN 1990:2002+A1:2005
Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005.
BS EN 1991-1-1:2002
Eurocode 1: Actions on structures – Part 1.1: General actions – Densities, self weight, imposed loads for buildings; with UK National Annex to BS EN 1991-1-1:2002.
BS EN 1991-1-3:2003
Eurocode 1: Actions on structures – Part 1.3: General actions – Snow loads; with UK National Annex to BS EN 1991-1-3:2003.
BS EN 1991-1-4:2005+A1:2010
Eurocode 1: Actions on structures – Part 1.4: General actions – Wind actions; with UK National Annex to BS EN 1991-1-4:2005+A1:2010.
BS EN 1991-1-5:2003
Eurocode 1: Actions on structures – Part 1.5: General actions – Thermal actions; with UK National Annex to BS EN 1991-1-5:2003.
BS EN 1991-1-6:2005
Eurocode 1: Actions on structures – Part 1.6: General actions – Actions during execution; with UK National Annex to BS EN 1996-1-6:2005.
BS EN 1991-1-7:2006
Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006.
BS EN 1991-3:2006
Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery; with UK National Annex to BS EN 1991-3:2006.
BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004.
BS EN 1993-1-1:2005
Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005.
BS EN 1993-1-3:2006
Eurocode 3: Design of steel structures – Part 1.3: General rules – Supplementary rules for cold- formed members and sheeting; with UK National Annex to BS EN 1993-1-3:2006.
BS EN 1993-1-4:2006
Eurocode 3: Design of steel structures – Part 1.4: General rules – Supplementary rules for stainless steels; with UK National Annex to BS EN 1993-1- 4:2006.
BS EN 1993-1-5:2006
Eurocode 3: Design of steel structures – Part 1.5: Plated structural elements; with UK National Annex to BS EN 1993-1-5:2006.
BS EN 1993-1-6:2007
Eurocode 3: Design of steel structures – Part 1.6: Strength and stability of shell structures.
BS EN 1993-1-7:2007
Eurocode 3: Design of steel structures – Part 1.7: Plated structures subject to out of plane loading.
BS EN 1993-1-8:2005
Eurocode 3: Design of steel structures – Part 1.8: Design of joints; with UK National Annex to BS EN 1993-1-8:2005.
BS EN 1993-1-9:2005
Eurocode 3: Design of steel structures – Part 1.9: Fatigue; with UK National Annex to BS EN 1993- 1-9:2005.
BS EN 1993-1-10:2005
Eurocode 3: Design of steel structures – Part 1.10: Material toughness and through-thickness properties; with UK National Annex to BS EN 1993-1-10:2005.
BS EN 1993-1-11:2006
Eurocode 3: Design of steel structures – Part 1.11: Design of structures with tension components; with UK National Annex to BS EN 1993-1-11:2006.
BS EN 1993-1-12:2007
Eurocode 3: Design of steel structures –Part 1.12: Additional rules for the extension of EN 1993 up to steel grades S 700; with UK National Annex to BS EN 1993-1-12:2007.
BS EN 1993-5:2007
Eurocode 3: Design of steel structures – Part 5: Piling; with UK National Annex to BS EN 1993- 5:2007+A1:2012.
BS EN 1993-6:2007
Eurocode 3: Design of steel structures – Part 6: Crane supporting structures; with UK National Annex to BS EN 1993-6:2007.
BS EN 1994-1-1:2004
Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004.
BS EN 1995-1-1:2004+A1:2008
Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex toBS EN 1995-1-1:2004+A1:2008.
BS EN 1996-1-1:2005+A1:2012
Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1- 1:2005+A1:2012.
BS EN 1996-2:2006
Eurocode 6: Design of masonry structures – Part 2: Design considerations, selection of materials and execution of masonry; with UK National Annex to BS EN 1996-2:2006.
BS EN 1996-3:2006
Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for unreinforced masonry structures; with UK National Annex to BS EN 1996-3:2006.
BS EN 1997-1:2004
Eurocode 7: Geotechnical design – Part 1: General rules; with UK National Annex to BS EN 1997-1:2004.
BS EN 1997-2:2007
Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing; with UK National Annex to BS EN 1997-2:2007.
BS EN 1998-1:2004+A1:2013
Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings; with UK National Annex to BS EN 1998-1:2004.
BS EN 1998-5:2004
Eurocode 8: Design of structures for earthquake resistance – Part 5. Foundations, retaining structures and geotechnical aspects; with UK National Annex to BS EN 1998-5:2004.
BS EN 1999-1-1:2007+A1:2009
Eurocode 9: Design of aluminium structures Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009.
BS EN 1999-1-3:2007+A1:2011
Eurocode 9: Design of aluminium structures Part 1.3: Structures susceptible to fatigue; with UK National Annex to BS EN 1999-1- 3:2007+A1:2011.
BS EN 1999-1-4:2007+A1:2011
Eurocode 9: Design of aluminium structures – Part 1.4: Cold-formed structural sheeting; with UK National Annex to BS EN 1999-1-4:2007.
BS EN 1999-1-5:2007
Eurocode 9: Design of aluminium structures – Part 1.5: Shell structures; with UK National Annex to BS EN 1999-1-5:2007.
BS EN 12620:2002+A1:2008
Aggregates for concrete. AMD 15333 2004.
BS EN 13670:2009
Execution of concrete structures.
BSI PD 6687-1:2010
Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3.
BSI PD 6688-1-1:2011
Published Document – Recommendations for the design of structures to BS EN 1991-1-1.
BSI PD 6688-1-4:2009
Published Document – Background information the National Annex to BS EN 1991-1-4 and additional guidance.
BSI PD 6688-1-7:2009
Published Document – Recommendations for the design of structures to BS EN 1991-1-7.
BSI PD 6693-1:2012
Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings.
BSI PD 6695-1-9:2008
Published Document – Recommendations for the design of structures to BS EN 1993-1-9.
BSI PD 6695-1-10:2009
Published Document – Recommendations for the design of structures to BS EN 1993-1-10.
BSI PD 6697:2010
Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2.
BSI PD 6698:2009
Published Document – Recommendations for the design of structures for earthquake resistance to BS EN 1998.
BSI PD 6702-1:2009
Published Document – Structural use of aluminium – Part 1: Recommendations for the design of aluminium structures to BS EN 1999.
BSI PD 6705-3:2009
Published Document – Structural use of steel and aluminium – Part 3: Recommendations for the execution of aluminium structures to BS EN 1090-3.
A3
BS EN 1990:2002+A1:2005
Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005.
BS EN 1991-1-7:2006
Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006.
BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004.
BS EN 1993-1-1:2005
Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005.
BS EN 1994-1-1:2004
Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004.
BS EN 1995-1-1:2004+A1:2008
Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex to BS EN 1995-1-1:2004+A1:2008.
BS EN 1996-1-1:2005+A1:2012
Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1-1:2005+A1:2012.
BS EN 1999-1-1:2007+A1:2009
Eurocode 9: Design of aluminium structures – Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009.
BSI PD 6687-1:2010
Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3.
BSI PD 6688-1-7:2009
Published Document – Recommendations for the design of structures to BS EN 1991-1-7.
BSI PD 6693-1:2012
Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings.
BSI PD 6697:2010
Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2.
BSI PD 6702-1:2009
Published Document – Structural use of aluminium – Part 1. Recommendations for the design of aluminium structures to BS EN 1999.
