Building Regulations and Other Guidance
Hide Filters
Standards referred to
A1/2
BS 5080-1:1993
Structural fixings in concrete and masonry. Method of test for tensile loading.
BS 8103-1:2011
Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing.
BS 8103-2:2005
Structural design of low-rise buildings. Code of practice for masonry walls for housing.
Structural design of low-rise buildings. Code of practice for masonry walls for housing.
BS 8103-3:2009
Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing.
Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing.
BS 8297:2000
Code of practice for design and installation of non-loadbearing precast concrete cladding. AMD 11064 2000, AMD 13018 2000.
Code of practice for design and installation of non-loadbearing precast concrete cladding. AMD 11064 2000, AMD 13018 2000.
BS 8298-1:2010
Code of practice for the design and installation of natural stone cladding and lining. General.
Code of practice for the design and installation of natural stone cladding and lining. General.
BS 8298-2:2010
Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding.
Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding.
BS 8298-3:2010
Code of practice for the design and installation of natural stone cladding and lining. Stone-faced pre-cast concrete cladding systems.
Code of practice for the design and installation of natural stone cladding and lining. Stone-faced pre-cast concrete cladding systems.
BS 8298-4:2010
Code of practice for the design and installation of natural stone cladding and lining. Rainscreen and stone on metal frame cladding systems.
BS 8500-1:2006+A1:2012
Concrete. Complementary British Standard toBS EN 206-1. Method of specifying and guidance for the specifier.
BS 8500-2:2006+A1:2012
Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete.
BS EN 197-1:2011
Cement. Composition, specifications and conformity criteria for common elements.
BS EN 197-2:2000
Cement. Conformity evaluation.
BS EN 771-1:2011
Specification for masonry units. Clay masonry units.
BS EN 771-2:2011
Specification for masonry units. Calcium silicate masonry units.
BS EN 771-3:2011
Specification for masonry units. Aggregate concrete masonry units (dense and light-weight aggregates). AMD 16001.
BS EN 771-4:2011
Specification for masonry units. Autoclaved aerated concrete masonry units.
BS EN 771-5:2011
Specification for masonry units. Manufactured stone masonry units.
BS EN 771-6:2011
Specification for masonry units. Natural stone masonry units.
BS EN 845-1:2003+A1:2008
Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets. AMD 14736 2003, AMD 15539 2006.
BS EN 845-2:2003
Specification for ancillary components for masonry. Lintels.
BS EN 845-3:2003+A1:2008
Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork.
BS EN 998-2:2010
Specification for mortar for masonry. Masonry mortar. AMD July 2011.
BS EN 1090-2:2008+A1:2011
Execution of steel structures and aluminium structures – Part 2: Technical requirements for the execution of steel structures.
BS EN 1090-3:2008
Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures.
BS EN 1990:2002+A1:2005
Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005.
BS EN 1991-1-1:2002
Eurocode 1: Actions on structures – Part 1.1: General actions – Densities, self weight, imposed loads for buildings; with UK National Annex to BS EN 1991-1-1:2002.
BS EN 1991-1-3:2003
Eurocode 1: Actions on structures – Part 1.3: General actions – Snow loads; with UK National Annex to BS EN 1991-1-3:2003.
BS EN 1991-1-4:2005+A1:2010
Eurocode 1: Actions on structures – Part 1.4: General actions – Wind actions; with UK National Annex to BS EN 1991-1-4:2005+A1:2010.
BS EN 1991-1-5:2003
Eurocode 1: Actions on structures – Part 1.5: General actions – Thermal actions; with UK National Annex to BS EN 1991-1-5:2003.
BS EN 1991-1-6:2005
Eurocode 1: Actions on structures – Part 1.6: General actions – Actions during execution; with UK National Annex to BS EN 1996-1-6:2005.
BS EN 1991-1-7:2006
Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006.
BS EN 1991-3:2006
Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery; with UK National Annex to BS EN 1991-3:2006.
BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004.
BS EN 1993-1-1:2005
Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005.
BS EN 1993-1-3:2006
Eurocode 3: Design of steel structures – Part 1.3: General rules – Supplementary rules for cold- formed members and sheeting; with UK National Annex to BS EN 1993-1-3:2006.
BS EN 1993-1-4:2006
Eurocode 3: Design of steel structures – Part 1.4: General rules – Supplementary rules for stainless steels; with UK National Annex to BS EN 1993-1- 4:2006.
BS EN 1993-1-5:2006
Eurocode 3: Design of steel structures – Part 1.5: Plated structural elements; with UK National Annex to BS EN 1993-1-5:2006.
BS EN 1993-1-6:2007
Eurocode 3: Design of steel structures – Part 1.6: Strength and stability of shell structures.
BS EN 1993-1-7:2007
Eurocode 3: Design of steel structures – Part 1.7: Plated structures subject to out of plane loading.
BS EN 1993-1-8:2005
Eurocode 3: Design of steel structures – Part 1.8: Design of joints; with UK National Annex to BS EN 1993-1-8:2005.
BS EN 1993-1-9:2005
Eurocode 3: Design of steel structures – Part 1.9: Fatigue; with UK National Annex to BS EN 1993- 1-9:2005.
BS EN 1993-1-10:2005
Eurocode 3: Design of steel structures – Part 1.10: Material toughness and through-thickness properties; with UK National Annex to BS EN 1993-1-10:2005.
BS EN 1993-1-11:2006
Eurocode 3: Design of steel structures – Part 1.11: Design of structures with tension components; with UK National Annex to BS EN 1993-1-11:2006.
BS EN 1993-1-12:2007
Eurocode 3: Design of steel structures –Part 1.12: Additional rules for the extension of EN 1993 up to steel grades S 700; with UK National Annex to BS EN 1993-1-12:2007.
BS EN 1993-5:2007
Eurocode 3: Design of steel structures – Part 5: Piling; with UK National Annex to BS EN 1993- 5:2007+A1:2012.
BS EN 1993-6:2007
Eurocode 3: Design of steel structures – Part 6: Crane supporting structures; with UK National Annex to BS EN 1993-6:2007.
BS EN 1994-1-1:2004
Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004.
BS EN 1995-1-1:2004+A1:2008
Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex toBS EN 1995-1-1:2004+A1:2008.
BS EN 1996-1-1:2005+A1:2012
Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1- 1:2005+A1:2012.
BS EN 1996-2:2006
Eurocode 6: Design of masonry structures – Part 2: Design considerations, selection of materials and execution of masonry; with UK National Annex to BS EN 1996-2:2006.
BS EN 1996-3:2006
Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for unreinforced masonry structures; with UK National Annex to BS EN 1996-3:2006.
BS EN 1997-1:2004
Eurocode 7: Geotechnical design – Part 1: General rules; with UK National Annex to BS EN 1997-1:2004.
BS EN 1997-2:2007
Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing; with UK National Annex to BS EN 1997-2:2007.
BS EN 1998-1:2004+A1:2013
Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings; with UK National Annex to BS EN 1998-1:2004.
BS EN 1998-5:2004
Eurocode 8: Design of structures for earthquake resistance – Part 5. Foundations, retaining structures and geotechnical aspects; with UK National Annex to BS EN 1998-5:2004.
BS EN 1999-1-1:2007+A1:2009
Eurocode 9: Design of aluminium structures Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009.
BS EN 1999-1-3:2007+A1:2011
Eurocode 9: Design of aluminium structures Part 1.3: Structures susceptible to fatigue; with UK National Annex to BS EN 1999-1- 3:2007+A1:2011.
BS EN 1999-1-4:2007+A1:2011
Eurocode 9: Design of aluminium structures – Part 1.4: Cold-formed structural sheeting; with UK National Annex to BS EN 1999-1-4:2007.
BS EN 1999-1-5:2007
Eurocode 9: Design of aluminium structures – Part 1.5: Shell structures; with UK National Annex to BS EN 1999-1-5:2007.
BS EN 12620:2002+A1:2008
Aggregates for concrete. AMD 15333 2004.
BS EN 13670:2009
Execution of concrete structures.
BSI PD 6687-1:2010
Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3.
BSI PD 6688-1-1:2011
Published Document – Recommendations for the design of structures to BS EN 1991-1-1.
BSI PD 6688-1-4:2009
Published Document – Background information the National Annex to BS EN 1991-1-4 and additional guidance.
BSI PD 6688-1-7:2009
Published Document – Recommendations for the design of structures to BS EN 1991-1-7.
BSI PD 6693-1:2012
Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings.
BSI PD 6695-1-9:2008
Published Document – Recommendations for the design of structures to BS EN 1993-1-9.
BSI PD 6695-1-10:2009
Published Document – Recommendations for the design of structures to BS EN 1993-1-10.
BSI PD 6697:2010
Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2.
BSI PD 6698:2009
Published Document – Recommendations for the design of structures for earthquake resistance to BS EN 1998.
BSI PD 6702-1:2009
Published Document – Structural use of aluminium – Part 1: Recommendations for the design of aluminium structures to BS EN 1999.
BSI PD 6705-3:2009
Published Document – Structural use of steel and aluminium – Part 3: Recommendations for the execution of aluminium structures to BS EN 1090-3.
A3
BS EN 1990:2002+A1:2005
Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005.
BS EN 1991-1-7:2006
Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006.
BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004.
BS EN 1993-1-1:2005
Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005.
BS EN 1994-1-1:2004
Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004.
BS EN 1995-1-1:2004+A1:2008
Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex to BS EN 1995-1-1:2004+A1:2008.
BS EN 1996-1-1:2005+A1:2012
Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1-1:2005+A1:2012.
BS EN 1999-1-1:2007+A1:2009
Eurocode 9: Design of aluminium structures – Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009.
BSI PD 6687-1:2010
Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3.
BSI PD 6688-1-7:2009
Published Document – Recommendations for the design of structures to BS EN 1991-1-7.
BSI PD 6693-1:2012
Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings.
BSI PD 6697:2010
Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2.
BSI PD 6702-1:2009
Published Document – Structural use of aluminium – Part 1. Recommendations for the design of aluminium structures to BS EN 1999.